Customization: | Available |
---|---|
Type: | Optic Detector |
Output Signal Type: | Analog Type |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
3mm SI APD Preamplifier Module
CR3000AH-905-50M
Introduction
The CR3000AH-905-50M includes a 3mm SI Avalanche Photodiode with a hybrid preamplifier for the use in high speed, ultra-low light detection, in laser range finding, LIDAR and free space communication.
Features
1. Built in 3mm SI APD+TIA
2. High sensitivity :≥600kV/W
3. High bandwidth :50Mhz
4. Wavelength range:400~1100nm
5. Low noise and high reliability
6. TO8 package with flat window
Applications
1. LIDAR
2. Laser range finding
3. Free space optical communication (FSO)
Absolute Maximum Ratings
Parameter | Unit | Symbol | Rating |
Reverse breakdown voltage | V | VR | 0.95 ×VBR |
Operating temperature | ºC | TC | -40~+85 |
Storage temperature | ºC | TSTG | -55~+100 |
Maximum optical input power | mW | Pin | 100 |
Module mains voltage | V | Vcc/VEE | ±5 |
Power dissipation | mW | Pw | 250 |
Soldering temperature(time) | ºC | - | 300( 10s) |
Parameter | Symbol | Value | Unit | Test conditions | ||
Min | Typ | Max | ||||
Response Spectrum | λ | 400~1100 | nm | |||
Active Diameter | D | 3 | mm | |||
Reverse breakdown voltage | VBR | 130 | 250 | V | ||
Operating voltage | VR | 0.95 ×VBR | V | M=100 | ||
Responsivity | RV | 600 | kV/W | M=100, 905nm@τ=20ns |
Dynamic range | DY | 25 | dB | M=100, 905nm@τ=20ns | ||
-3dB bandwidth | BW | 50 | Mhz | M=100, 905nm@τ=20ns | ||
Rise/Fall time | tr | 7 | ns | M=100, 905nm@τ=100ns | ||
Noise Equivalent Power | NEP | 100 | fW/√Hz | M=10 ,f=100kHz, △=1hz | ||
Output impedance | RO | 50 | Ω | |||
Output Voltage Swing | VO | 0.7 | V | |||
Positive Supply Current | ICC | 30 | mA | |||
Negative Supply Current | IEE | 10 | mA | 50Ω Load | ||
Temperature coefficient of Vop for constant gain | γ |
1.2 |
V/oC |
-40~+85ºC |
||
Temperature sensor Sensitivity (IN914) | α |
-1.8 |
-2.1 |
-2.4 |
mV/oC |
-55~+85ºC |
Concentricity | △D | 50 | um |
CR-1-2-3-4 | |||
1-High Responsiveness Target Surface | 2-Spectrum Response | 3-Responsive Bandwidth | 4-Customization Requirements |
200AH: 0.2mm 800AH: 0.8mm 1000AH: 1.0mm 3000AH: 3.0mm … |
1550: 1550nm 1064: 1064nm 940: 800~940nm … |
30M: 30MHz 50M: 50MHz 70M : 70MHz 100M: 100MHz … |
00: NO LN: Low noise … |