| Customization: | Available |
|---|---|
| Application: | Communication, Sensor |
| Type: | Pm Fiber |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| NO. | Parameters | Min | Typical | Max | Unit | Remarks |
| 1. | Operating temperature | -5 | - | 55 | .C | Necessary heat dissipation treatment |
| 2. | Storage temperature | -40 | - | 85 | .C | |
| 3. | Operating relative humidity | 5 | - | 85 | % | |
| 4. | Store relative humidity | 5 | - | 95 | % | |
| 5. | Mechanical environment | / | ||||
| 6. | Quality level | / | ||||
| No. | index | Min | Typical | Max | Unit | Remarks |
| 1. | Wavelength Range | 1529.55 | 1550.12 | 1563.86 | nm | ITU:C17~C60 |
| 2. | Number of wavelengths | - | 1 | - | CH | |
| 3. | Input optical power range | -30 | 3 | +10 | dBm | |
| 4. | Output total optical power range | 0 | 23 | 23 | dBm | |
| 5. | Gain | 18.5 | 20 | 21.5 | dB | Non-adjustable gain |
| 6. | Gain flatness | - | 1.5 | 2 | dB | @ gain20±1.5dB |
| 7. | Noise | - | 5.5 | 6 | dB | |
| 8. | Return loss | 45 | - | - | dB | |
| 9. | No light reporting | -60 | dBm | |||
| 10. | Output power stability | - | - | ±0.2 | dB | |
| 11. | Power reporting accuracy | - | - | ±0.5 | dB | |
| 12. | Output power control accuracy | - | - | ±0.5 | dB | |
| 13. | Input and output isolation | 30 | - | - | dB | |
| 14. | Polarization-dependent gain | - | - | 0.3 | dB | |
| 15. | Polarization Mode Dispension(PMD) | - | - | 0.5 | ps | |
16. |
Input the low light signal alarm Threshold (Input Alarm Simultaneous Pump Off) |
- |
-31 |
- |
dBm |
The scope can be set -31~+9dBm, 1dB upward hysteresis, less than -31dBm reports no light |
17. |
Output light alarm threshold |
- |
-10 |
- |
dBm |
The scope can be set -10~22, 1dB upward hysteresis, less than -11 reported no light |
| 18. | Settable Range of the APC output power | 0 | - | 23 | dBm | |
| 19. | Input and output fiber length | 95 | 100 | 105 | cm | Contains the connector length |
| 20. | Input and output fiber type | 900um white loose tube SMF-28e | ||||
| 21. | Fiber optic connector type | FC/APC | ||||
| 22. | Working mode | APC(default)/ACC | ||||
| 23. | Ports | - | 2(INPUT&OUTPUT) | |||
){kind=link}